Windows 95 Setup - Graco Horizon Fluid Management Systems Instructions Manual

Computer: Receiving Horizon Data
Windows 3.1
Saving Horizon Job Records to
the Computer
Follow these steps to save the Horizon job records to
the computer disk. You can save the job records to files
with each day's date (for example: 11--19--97.TXT). If
the job records are not saved, they will scroll off the
terminal program screen and the information will be
lost.
1. When you want to save data from the Horizon
system to the computer disk, pull down the termi-
nal Transfers menu and select Receive Text File.
2. Type in the desired File Name.
3. Make sure the Save Files of Type is set to Text
Files (*.TXT).
4. Select the desired Drive and Directory where you
want the Horizon data to be saved.
5. Select OK.
44 308607
Windows 95
The following instructions are for use with computers
running Windows 95.
Terminal Program Setup
Follow these steps to provide the terminal program
with the settings needed to receive Horizon data. Once
these settings are saved, they do not have to be set
and saved again, just load the HORIZON.TRM file
each time the terminal program is started up.
1. On your Start menu, select Programs "Acces-
sories " HyperTerminal.
2. Open Hypertrm.exe.