Mount Control Module And Keypad Bracket - Graco Horizon Fluid Management Systems Instructions Manual

5. Mount the Control Module and Keypad
Bracket
Control Module
D The control module(s) should be mounted near the
hose reels. Control modules can be mounted on the
wall or at ceiling level.
D Locate the control module(s) as directed in the floor
plan, being sure to follow the cable length and other
configuration requirements.
D The mounting surface must be able to support the
weight of the control module, 14 lbs. (6.3 kg). Use
wall anchors if necessary.
D See Fig. 3 for the mounting hole layout.
©
6 in. (152.4 mm)
¡
© 8.75 in. (222.3 mm)
Fig. 3
Hardware Installation
¡
Keypad Bracket
See Fig. 4 for the mounting hole layout.
¡
¡ 3.44 in. (87.4 mm)
3.66 in. (93.0 mm)
©
¢ 1.97 in. (50.0 mm)
Fig. 4
06799
£
¤
¢
©
£ 1.77 in. (45.0 mm)
0.62 in. (15.7 mm)
¤
308607 13