Enable/Disable Can Option; Modify Or New Setup Options - Graco Horizon Fluid Management Systems Instructions Manual

System Setup - - Modify or New
Instructions
Modify Setup Options
1. With the cursor at MODIFY SETUP, press ENTER
on the keypad.
2. The SETUP OPTIONS screen will appear. Only
Master Control Module will have TIME AND DATE
on the screen.
3. Scroll to the option that needs to be modified by
pressing the # or " key.
4. Press ENTER on the keypad when the cursor is at
the desired option.
5. Follow the instructions for modifying the selected
option, starting on page 29.
6. Every time a setup option is modified and saved,
the controller will return to the SETUP OPTIONS
screen to allow another option to be selected and
modified until HOME is pressed.
New Setup Options
NOTE: If you are installing a new system, use CLEAR
SETUP!ALL MEMORY to prepare the system for
setup. See page 39.
1. With the cursor at NEW SETUP, press ENTER on
the keypad.
2. Follow the instructions for modifying the options,
starting on page 29.
3. Every time a setup option is modified and saved,
the controller will go directly to the first screen of
the next setup subroutine.
22 308607
Screens
The options that can be defined in MODIFY
SETUP include:
D Time and date*
D Operator pass-
words
D Control modules
D Fluids
D Dispense areas
* On Master Control Module only.
_ _ _ _ _ _ _ _ _ _" SETUP A_ _ _ _ _ _ _ _ _ _
ENABLE/DISABLE CAN
MODIFY SETUP
NEW SETUP
MODIFY SETUP Screen
SETUP OPTIONS:
TIME AND DATE
OPERATOR PASSWORDS
CONTROL MODULES
The options that can be defined in NEW
SETUP include:
D Time and date*
D Operator pass-
words
D Control modules
D Fluids
D Dispense areas
* On Master Control Module only.
_ _ _ _ _ _ _ _ _ _" SETUP A_ _ _ _ _ _ _ _ _ _
ENABLE/DISABLE CAN
MODIFY SETUP
NEW SETUP
D Assign connections
D Meter calibration
D Inventory
D Comm. on CM #1
D Run options
D System time outs
D Assign connections
D Meter calibration
D Inventory
D Comm. on CM #1
D Run options
D System time outs
#
#
#