System Cables - Graco Horizon Fluid Management Systems Instructions Manual

Horizon System Components

System Cables

For Keypad or Printer Connections
(include connectors)
Part No. For
191393 Keypad or
Printer (new style)
191394 Keypad or
Printer (new style)
191395 Printer (old style)
191396 Printer (old style)
For Computer Connections
(include connectors)
Part No. For
192873 Computer I/O
192874 Computer I/O
For Meter, Solenoid, or Network Connections
(bulk cable)
Part No. For
113555 Pulse Meter
113556 Pulse Meter
113557 Solenoid
113558 Solenoid
113559 Network
113560 Network
Belden Bulk Cable Part Nos.
Order length needed
Part No. For
8770 Pulse Meter
9740 Solenoid
8761 Network
78 308607
Length
25 ft. (7.6 m)
50 ft. (15.3 m)
25 ft. (7.6 m)
50 ft. (15.3 m)
Length
25 ft. (7.6 m)
50 ft. (15.3 m)
Description Length
3 conductors, 500 ft.
shielded (152.5 m)
3 conductors, 1000 ft.
shielded (305 m)
2 conductors, 500 ft.
unshielded (152.5 m)
2 conductors, 1000 ft.
unshielded (305 m)
2 conductors, 500 ft.
shielded (152.5 m)
2 conductors, 1000 ft.
shielded (305 m)
Keypad Cables (with connector)
These cables connect keypads to control modules.
They are available in 25 and 50 ft. (7.6 and 15.3 m)
lengths, with 9-pin RS--232 connectors. Keypads can
be no further than 50 ft. (15.3 m) from the control
module.
Computer Cables (with connector)
These cables connect the Horizon output port to a
computer serial connector for data transfer.
They are available in 25 and 50 ft. (7.6 and 15.3 m)
lengths, with 9-pin RS--232 connectors. Computers can
be no further than 50 ft. (15.3 m) from the control
module.
Printer Cables (with connector)
These cables connect the printer to the Master Control
Module. They are available in 25 and 50 ft. (7.6 and
15.3 m) lengths, with 9-pin RS--232 connectors. These
cables are not interchangeable with the computer
cables as the pin assignments are different. The printer
can be no further than 50 ft. (15.3 m) from the Master
Control Module.
NOTE: Part no. 191395 and 191396 are for the old-
style printer 113774 only. See the printer drawing on
page 80.
Pulse Meter Cables (bulk)
These cables connect the pulse meters to the control
modules. They are 3-conductor, 18 AWG shielded
cables and are available in bulk spools of 500 or 1000
ft. (152.5 or 305 m). Pulse meters can be no further
than 50 ft. (15.3 m) from a control module.