System Setup - - Startup; Startup Screen; Mode Selection (Home); Enter Password - Graco Horizon Fluid Management Systems Instructions Manual

CAUTION
The addresses in the software must match the
physical connections to the control modules or the
system will not operate properly.
Instructions

Startup Screen

This screen is displayed for four seconds after the
system is turned on, then the Mode Selection screen
(or Home screen) appears.

Mode Selection (HOME)

This is the HOME screen. It is the destination any time
the HOME button on the keypad is pressed.
1. Cursor is initially on RUN.
2. Move the cursor to SETUP by pressing the " or #
key.

Enter Password

The password is determined by what is entered during
setup. The first time the system is started, the Pass-
word is 1111.
1. Cursor is in the PASSWORD field.
2. Type the password.

System Setup - - Startup

Screens
STARTUP Screen
HORIZON
REV X.XX
GRACO INC
COPYRIGHT XXXX
NOTE: The SETUP option can only be modified on
the administrator keypad.
3. Press ENTER on the keypad.
HOME Screen
_ _ _ _ _ _ _ _ _ _" HOME A_ _ _ _ _ _ _ _ _ _
RUN
INVNT
3. Press ENTER on the keypad.
PASSWORD Screen
ENTER PASSWORD
SETUP MENU
SETUP
XXXX
308607 19