Run Mode - Graco Horizon Fluid Management Systems Instructions Manual

Instructions
Startup Screen
This screen is displayed for four seconds after the
system is turned on, then the Mode Selection screen
(or HOME screen) appears. If the system was turned
on previously, you will not see this startup screen.
1. Mode Selection (HOME)
This is the HOME screen. It is the destination any time
the HOME button on the keypad is pressed.
a.. Cursor is at RUN.
a. Press ENTER on the keypad.
2. Enter Password
The password is optional and is determined by what is
entered during setup. Get your password from your
system administrator.
a.. Cursor is in the PASSWORD field.
b.. Type the password.
a. Press ENTER on the keypad.

3. Run Mode

a.. RUN screen appears.
b.. Cursor is at NEW JOB.
c.. Press the " or # key to scroll to the Run Option
you want to use.
d.. Press ENTER on the keypad.
NOTE: REPORT JOBS option only appears on the
keypad connected to the Master Control Module.
48 308607
Run Mode
STARTUP Screen
HOME Screen
_ _ _ _ _ _ _ _ _ _" HOME A_ _ _ _ _ _ _ _ _ _
RUN
INVNT
PASSWORD Screen
RUN Screen
_ _ _ _ _ _ _ _ _ _" RUN A_ _ _ _ _ _ _ _ _ _
NEW JOB
VIEW CURRENT JOBS
REPORT JOBS
Screens
HORIZON
REV X.XX
GRACO INC
COPYRIGHT XXXX
SETUP
ENTER PASSWORD
RUN MENU
XXXX