Technical Data - Graco Horizon Fluid Management Systems Instructions Manual

System Specifications
40 maximum Control Modules in a system (1 Master only, plus 39 Slave)
40 maximum Keypads in a system (1 keypad per Control Module; Administrators Keypad
must be connected to the Master Control Module)
240 maximum Solenoids in a system (40 Control Modules, 6 ports each)
240 maximum Meters in a system (40 Control Modules, 6 ports each)
10 maximum Fluids supported by a system
99 maximum Dispense Areas (reel banks)
100 maximum Operator Names/PIN numbers
668 maximum Dispense Records stored
12 maximum Simultaneous Dispenses (same and/or different fluids)
12 maximum Jobs Waiting in Queue
Printer per system (must be connected to Master Control Module)
1 maximum
OR
Attached Computer per system (must be connected to Master Control Module)
Control Module Ports
6 Solenoid Ports per Control Module
6 Pulse Meter Ports per Control Module
1 Port for Keypad per Control Module
1 Port for printer or computer per Master Control Module
1 Bar code reader per control module
Voltage Input
110 Volts AC, 50/60 Hz, 2 amps maximum draw
220 Volts AC, 50/60 Hz, 1 amp maximum draw
Environment
Operating Temperature Range
o o
40--140 F (4--60 C) ambient
Humidity Range
0--95% non-condensing
Preset or Free-flow Limits
999.9 Units Maximum Preset or free-flow dispense
0.5 Units Minimum Preset dispense
Dispense Units of Measure: liters, quarts, gallons or pints (configurable for each fluid)
Inventory Units of Measure: liters or gallons (dependent upon dispense units chosen)
Maximum Cable Lengths
50 ft. (15.3 m) From Keypad to Control Module
50 ft. (15.3 m) From Solenoid to Control Module
50 ft. (15.3 m) From Pulse Meter to Control Module
50 ft. (15.3 m) From Printer or Computer to Master Control Module
2000 ft. (610 m) From one end of the Control Module Network to the other end (daisy-chained)

Technical Data

308607 107