Run Options - Graco Horizon Fluid Management Systems Instructions Manual

System Setup - - Run Options
Instructions
Set Run Options
1. Cursor is on YES in the PASSWORD? field in the
RUN OPTIONS screen.
2. If it is desired to require the operator to enter a
password, press ENTER with the cursor on YES.
3. Scroll to NO by pressing the # or " key.
4. If you do not want to require the operator to enter a
password, press ENTER with the cursor on NO.
5. Continue to set either YES or NO in the JOB
NUMBER, VEHICLE ID, REQUEST PRESET, AND
CUSTOM INPUT fields.
6. If YES is selected for CUSTOM INPUT, the cursor
will move to the NAME field. Type in the name of
the additional information you want the operator to
enter, for example, MILEAGE. Can enter up to 10
characters.
Save the Setup
Follow the Save Setup procedure on page 30.
38 308607
Screens

RUN OPTIONS:

PASSWORD?
JOB NUMBER?
VEHICLE ID?
RUN OPTIONS:
REQUEST PRESET?
CUSTOM INPUT?
NAME: _________________
YES
YES
YES
YES
YES