Table of Contents
Advertisement
8 Arm systems
8
Arm systems
8.1
Pushing installation with PUSH-arm
This arm system is delivered with drive arm, telescopic part and door fitting. It is used if the oper-
ator is installed on the wall on the opposite side of the door swing, and approved for fire door ap-
plication.
Art. No.:1007241BK/SI
Extension
345 mm extension
Art. No.: 173005BK/SI
230 mm extension
Art. No.: 173004BK/SI
Joint part
Art. No.: 173191
None (Standard arm)
Telescopic part L= 345 mm
Extension L= 230 mm + joint part
Recommended spring tension
24
Frame depth
LE Performance
7 5/8"(194 mm)
95 mm
3 3/4"(95 mm)
A = reveal
0-115 mm
115-250 mm
250-305 mm
For IBC Egress door with 22N manual opening
force, use 180° spring tension
Issue 2021-02-24
A
194 mm
8 1/4"(210 mm)
210 mm
0-100 mm
100-215 mm
215-305 mm
360-720° spring tension
High Performance
2 3/8"(60 mm)
60 mm
A = reveal
1009728-en-9.0
Advertisement
Table of Contents
