Hyundai hirun N100 plus Instruction Manual page 97

plus
N100 INSTRUCTION MANUAL
Func- Func-
Name Name
code code
2nd control,
acceleration
S10
time 2 setting
2nd control,
S11
deceleration
time 2 setting
2nd control,
acceleration
S12
pattem setting
2nd control,
deceleration
S13
pattem setting
2nd control,
2-stage
Accel./decel.
S14
transition
method setting
2nd control,
acceleration
S15
transition
frequency setting
2nd control,
deceleration
transition
S16
frequency
setting
2nd control,
electronic
S17
thermal level
setting
Description Description
Range is 0.1 to 999.9sec in units of 0.1sec,
1000 3000sec in units of 1 sec. Second
acceleration can be set by the [2CH] terminal
input or frequency transition setting
Range is 0.1 to 999.9sec in units of 0.1sec,
1000 3000sec in units of 1 sec. Second
acceleration can be set by the [2CH] terminal
input or frequency transition setting
Set the characteristic curve of Acc 1 and
Acc2, three options.
0:linear, 1:S-curve,
Set the characteristic curve of Dec 1 and
Dec2, three options.
0:linear, 1:S-curve,
0 --terminal(2CH), 1 -- transition frequency
frequency
Acc1
Output frequency at which Acc1 switches to
Acc2, range is 0.0 to 400.0Hz in units of
0.01Hz
Output frequency at which Dcc1 switches to
Dcc2, range is 0.0 to 400.0Hz in units of
0.01Hz
Set a level between 20% to 120% for the rated
inverter current
setting range : 0.2*(inverter ratedcurrent)
1.2*(
2:U-curve
2:U-curve
Acc2
time
2CH
inverter ratedcurrent
Run-
Defaults Defaults
time
Edit
10.00sec
10.00sec
0
0
0
0.00Hz
0.00Hz
100.0%
)