plus
N100 INSTRUCTION MANUAL
Check the following before and during the powerup test.
Is the direction of the motor correct?
Otherwise, there is the danger of equipment damage.
Were there any abnormal motor vibrations or noise?
Otherwise, there is the danger of equipment damage.
NOTE1)
1. Did the inverter trip during acceleration or deceleration?
2. Were the rpm and frequency meter readings as expected?
If the over current or over voltage trip is occurred of the power up
test, set the acceleration or deceleration time longer.
Maximum frequency : 60Hz
Rotation direction : forward run
CAUTION
Factory setting
Need help?
Do you have a question about the hirun N100 plus and is the answer not in the manual?