Port 2 Connection Cable - PRONOVA SSM 6000 User Manual

SSM 6000
CONT

11.5 PORT 2 connection cable

Ready-to-connect control cable, 10m or 20m long, for transmitting the signals to the general system controller. Other lengths on
request.
PIN Color code (DIN 47100)
1 white
2 brown
3 green
4 yellow
5 gray
6 pink
7
blue
8 red
9 black
10 violet
11 gray/pink
12 red/blue
13 white/green
14 brown/green
15 white/yellow
16 yellow/brown
17 white/gray
18
gray/brown
19 white/pink
20 pink/brown
21 white/blue
22 brown/blue
23 white/red
24 brown/red
25
800C-07.07.EN
Signals Connection cable specifications:
12VDC Control cable
DO-02 Type: LiYCY, common shield
DO-04 Cross-section 0.25mm² / 80Ohm/km max.
DO-06 Max. operating voltage 250V
DO-08 Nominal current 2.5A max.
DO-10
DO-12 Connection 1 (SSM6000)
GND D-sub plug connector, 25-pole
D-sub metal housing
Connection 2
Open cable ends, length: 150 mm
Color-coded wires / wire end sleeves 0.25mm²
DO-01
DO-03 - Shield connected to D-sub housing
DO-05 - At connection 2, the shield is made available via a
DO-07 green/yellow wire 0.5mm² with wire end sleeve (length: 200mm)
DO-09
DO-11 - Cable ends not conbnected must be insulated individually!
DO-13
SSM 6000C User Manual
ACCESSORY CONNECTION CABLES
.
RMS
69