SSM 6000
CONT
5.3.4
Operation mode AUTO/MANUELL
In the case of a configuration of the SSM6000 system with function cycle No. 04, no distinction is made between automatic and
manual measuring cycles. If the device is controlled via the digital inputs or via the Profibus interface, an H
"9999" should be set in order to avoid conflicts with the automatic measuring interval.
5.3.5
DEVICE ID
OPERATION MODE:
_ AUTO/MANU MEAS.
_ DEVICE-ID
_ LANGUAGE SELECT
This menu is used to set the device address for the PROFIBUS or CANBUS interface, respectively. The ex-factory device address
settings are "110" for the PROFIBUS and "16" for the CANBUS. The "DEVICE ID" menu is only active if the corresponding interface
was activated by the manufacturer. For further details, please refer to the appendix to this documentation.
5.3.6
Select language
LANGUAGE SELECT:
SELECTED ENGLISH
_ GERMAN
_ ENGLISH
5.3.7
Date/Time
DATE/TIME:
_ DATE
: 11:40:02
_ TIME
: 07.11.04
800C-07.07.EN
DEVICE-ID (dec):
_PROFIBUS 110
_CANBUS
16
The menu language, i.e. German or English, is selected here.
In the device options
DATE/TIME menu, the current time can be set in the HH:MM:SS format
and the current date in the DD:MM:YY format.
Note that the clock of the SSM 6000 does not automatically switch to daylight saving time and
winter time. Leap years are, however, considered.
SSM 6000C User Manual
MENU AND FUNCTION OVERVIEW
S measuring interval of
2
45