Warranty Conditions - PRONOVA SSM 6000 User Manual

SSM 6000
CONT
Measuring-gas cooler / cooler status "error"
After power-on, the measuring-gas cooler is not yet ready for operation. The cooler should have reached its operating
-
temperature and the "error" LED should go off after around 10 minutes.
A measuring-gas cooler overload condition exists during operation as a result of the excessively high dew point of the inflowing
-
gas, or as a result an excessive volume flow or ambient temperature.
The device is defective.
-
If it is not possible to solve the problem, please contact the manufacturer.

10 Warranty conditions

The manufacturer assumes a 24-month guarantee for the SSM6000 Classic and a 12-month guarantee for the SSM6000 LT, i.e.
beyond the statutory guarantee period for electric devices, if the following conditions are fulfilled:
The device must at all times have been handled properly and with the care necessary for an electronic device.
All instructions and information contained in this manual must have been adhered to.
The system must have been operated within the specified temperature range.
No more than 24 H
The measuring gas must be free from any other corrosive components.
No guarantee is assumed for parts subject to consumption, wear and tear, such as measuring-gas filters.
800C-07.07.EN
Pronova Analysentechnik GmbH & Co. KG
Groninger Straße 25
13347 Berlin, Germany
Telephone
Fax
E-mail
Web
S-measurements may have been performed per day.
2
SSM 6000C User Manual
STATUS MESSAGES, TROUBLE-SHOOTING
+49 (0)30 / 455 085 -0
+49 (0)30 / 455 085 –90
info@pronova.de
www.pronova.de
58