Starting Normal Measuring Operations - PRONOVA SSM 6000 User Manual

SSM 6000
CONT
6.5

Starting normal measuring operations

After all functions of the device are checked and if the test measurements indicate correct operation of the system, the analyzer can
be switched to normal measuring mode.
STAND-BY
Meas. with <enter>
After the start of the measuring process, the CH
displayed. The LC display shows the time for the next H
measurement is also started and the result is displayed at the end of the measuring cycle.
800C-07.07.EN
CONT. MEASUREMENT
H2S IN 285 MIN
, O and CO gas types are continuously measured and the values measured are
4 2 2
S measurement. As soon as the set interval has expired, an H
2
SSM 6000C User Manual
SETTING INTO OPERATION
S
2
49