Device Options; Datalogger - PRONOVA SSM 6000 User Manual

SSM 6000
CONT
5.3

Device options

SYSTEM OPTIONS:
_ DATA OUTPUT
_ OPERATION MODE
_ DATE/TIME
DATA OUTPUT:
_ DATA LOGGER
_ ANALOG OUTPUT
_ SENSOR DATA
OPERATION MODE:
_ AUTO/MANU MEAS.
_ DEVICE-ID
_ LANGUAGE SELECT
DATE/TIME:
_ DATE : 11:40:02
_ TIME : 07.11.04
5.3.1

Datalogger

Output on LCD
Besides output of measured values via the RS232 interface, the OUTPUT ON LCD menu item additionally enables the display of the
contents of the data logger on the device. The <down> and <up> keys can be used to select and display all H
When you press the <enter> key, the device temperature is displayed instead of [CH
measuring point of the selected measurement instead of [O
green / yellow when the gas concentration values are displayed.
DATALOGGER: 3265
_ OUTPUT TO RS232
_ OUTPUT TO LCD
_ RS232 INTERVALL
800C-07.07.EN
The DEVICE OPTIONS menu item contains the following options.
DATA LOGGER
ANALOG OUTPUT
SENSOR DATA
AUTO/MAN MEASUREMENT
DEVICE ID
SELECT LANGUAGE
DATE/TIME
]. The status LEDs flash yellow / red in this mode. The status LEDs flash
2
OUTPUT TO LCD:
_ 15.01.01 12.00
_ 16.01.01 00.00
_ 16.01.01 12.00
SSM 6000C User Manual
Digital output of measured values with time stamp
Editor level for analog measured-value outputs
Display of sensor signals
Menu inactively
Profibus/CANBUS: setting the device address
Setting the menu language (German or English)
-> Setting time and date
], the air pressure instead of [H
4
MENU AND FUNCTION OVERVIEW
S measurements.
2
S], and the
2
38