Internal Hardware Components - Nortel Secure Router 4134 Installation — Hardware Components

Table 29
Module LEDs
LED
10/100/1000
BASE-T PORT
STATUS
SFP PORT
STATUS

Internal hardware components

There are four internal hardware components that you can service or
upgrade:
•
•
•
•
The following figure shows the internal hardware components that are field
serviceable. For information about locating and removing the service panel
to access the internal hardware components, refer to Nortel Secure Router
4134 Installation — Chassis (NN47263-300).
Copyright © 2007, 2008 Nortel Networks
.
Description
LEDs are integrated into each port.
Status of each interface:
•
Off: Link not connected or Link Fail
•
Solid Green: Link established at 10 or 100 Mbps
•
Solid Orange: Link established at 1000 Mbps
•
Blinking Green or Orange: Receiving or transmitting traffic
LEDs are integrated into each port.
Status of each interface:
•
Off: Link not connected or Link Fail
•
Solid Orange: Link established at 1000 Mbps
•
Blinking Orange: Receiving or transmitting traffic
DDR SO-DIMM
VPN/IPSec module
Packetized Voice Module (PVM)
Internal system compact flash
Nortel Secure Router 4134
Installation — Hardware Components
NN47263-301 02.01 Standard
18 February 2008
Internal hardware components 51