Nortel Secure Router 4134 Installation — Hardware Components page 38

38 Nortel Secure Router 4134 hardware components fundamentals
Figure 12
4-port FXO Small Module
The following table lists the connectors and cable to use with the 2- and
4-port FXO Small Modules.
Table 12
Cable and connectors
Port Connector
FXO RJ11
ATTENTION
Ensure you use straight cables with FXO modules. TIP must connect to TIP and
RING must connect to RING.
The following table describes the LED states for the 2- and 4-port FXO
Small Modules.
Table 13
Module LEDs
LED
LINK/STAT 1
LINK/STAT 2
Copyright © 2007, 2008 Nortel Networks
.
Recommended
cable type
24 AWG Catego
ry 5 twisted pair
cable
Description
Status of interface 1:
•
Red: The port is not configured
•
Green: A call is in progress
•
Yellow: The port is configured and ready to accept calls
Status of interface 2:
•
Red: The port is not configured
•
Green: A call is in progress
•
Yellow: The port is configured and ready to accept calls
Nortel Secure Router 4134
Installation — Hardware Components
NN47263-301 02.01 Standard
18 February 2008
Minimum cable Loop length
length
N/A 5500 ft (1676.4
m)