Removing The Internal Pvm - Nortel Secure Router 4134 Installation — Hardware Components

80 Installing Secure Router 4134 hardware components
6
7

Removing the internal PVM

Use the procedure in this section to remove a PVM from the Secure
Router 4134.
Average time to remove a PVM: 1 minute.
Copyright © 2007, 2008 Nortel Networks
.
Install the access panel onto the Secure Router 4134.
Install the two screws that secure the service access panel to
the Secure Router 4134.
CAUTION
The internal PVM is not hot swappable. Do not open the Secure
Router 4134 service access panel while the unit is powered.
Nortel Secure Router 4134
Installation — Hardware Components
NN47263-301 02.01 Standard
18 February 2008
--End--