Prerequisites; Installing A Small Module - Nortel Secure Router 4134 Installation — Hardware Components

Figure 27
Slot numbering legend printed on the Secure Router 4134
Slots 1–4 are Small Module slots. Slots 5–7 are Medium Module slots. If
you insert a Large Module, it spans slots 6 and 7. In this case, the Large
Module is identified in the Command Line Interface (CLI) as slot 6.
Average time to install an interface module: 1 minute.

Prerequisites

•

Installing a Small Module

Use the procedure in this section to install a Small Module in the Secure
Router 4134. For instructions to install a Small Module in the VCMM, see
"Installing a Small Module in the Voice Carrier Medium Module" (page
Copyright © 2007, 2008 Nortel Networks
.
CAUTION
ESD
To prevent damage from electrostatic discharge, always wear
an antistatic wrist strap connected to an ESD jack when working
with interface modules.
CAUTION
Risk of equipment damage
Always handle interface modules by the edges, or by using the
levers, where applicable.
Ensure you have a Phillips #2 screwdriver.
Nortel Secure Router 4134
Installation — Hardware Components
NN47263-301 02.01 Standard
18 February 2008
Installing the interface modules 59
62).