Replacing The Dimm In The Secure Router 4134 - Nortel Secure Router 4134 Installation — Hardware Components

82 Installing Secure Router 4134 hardware components
5
6

Replacing the DIMM in the Secure Router 4134

Use the instructions in this section if you must replace the DIMM. The
DIMM is not hot-swappable.
Average time to replace a DIMM: 2 minutes.
Copyright © 2007, 2008 Nortel Networks
.
Firmly grasp the edges of the PVM and pull straight up to
remove the PVM from the slot.
If you are replacing a PVM, also see
(page 77).
If you are not installing a PVM at this time, replace the service
access panel.
CAUTION
Do not open the Secure Router 4134 service access panel while
the unit is powered.
Nortel Secure Router 4134
Installation — Hardware Components
NN47263-301 02.01 Standard
18 February 2008
"Installing the internal PVM"
--End--