Table of Contents
Advertisement
Caution
The DOS
command line tool is not officially supported by congatec and therefore not recommended for critical tasks such as firmware
updates. We recommend to use only the UEFI shell for critical updates.
11.2.1
Update from External Flash
For instructions on how to update the BIOS from external flash, refer to the AN7_External_BIOS_Update.pdf application note on the congatec
website at http://www.congatec.com.
11.3
Supported Flash Devices
The conga-TCA3 supports the following flash device:
• Winbond W25Q64JVSSIQ (8 MB)
The flash device listed above can be used on the carrier board for external BIOS support.
Copyright © 2014 congatec AG
TA30m16
95/95
Advertisement
Table of Contents
Related Manuals for Congatec COM Express conga-TCA3
Related Products for Congatec COM Express conga-TCA3
- Congatec Qseven conga-QMX6/DCL-1G eMMC4
- Congatec Qseven conga-QMX6/DC-1G eMMC4
- Congatec Qseven conga-QMX6/QC-1G eMMC4
- Congatec Qseven conga-QMX6/QC-2G eMMC8
- Congatec Qseven conga-QMX6/QC-1G eMMC8
- Congatec Qseven conga-QMX6/iSC-1G eMMC4
- Congatec Qseven conga-QMX6/iDCL-1G eMMC4
- Congatec Qseven conga-QMX6/iDC-1G eMMC4
Need help?
Do you have a question about the COM Express conga-TCA3 and is the answer not in the manual?
Questions and answers