Related Manuals for Congatec conga-QMX8X
Summary of Contents for Congatec conga-QMX8X
- Page 1 Sample Distribution Set Quick Start Guide Revision 1.0 Copyright © 2019 congatec AG QX8X_SDS_q10.indd 1/10...
-
Page 2: Intended Audience
In no event shall congatec AG be liable for any Copyright © 2019, congatec AG. All rights reserved. All text, pictures and incidental, consequential, special, or exemplary damages, whether based graphics are protected by copyrights. -
Page 3: Warranty
(c) arising from course of performance, course of dealing, or usage of trade. congatec AG shall in no event be liable to the end user for collateral or consequential damages of any kind. congatec shall not otherwise be liable for loss, damage or expense directly or indirectly arising from the use of the product or from any other cause. -
Page 4: Set Content
Note: Future conga-QEVAL revisions (B.5 and later) will provide improved SD card compatibility and improved audio performance via a congatec specific audio card. The current sample distribution set includes the conga-QEVAL revision B.4 and does not include the congatec specific audio card. Copyright © 2019 congatec AG QX8X_SDS_q10.indd... -
Page 5: Connecting The Hardware
Note: Put the two screws through the module first. conga-LDVI/EPI PN: 011115 cab-LVDV-DAT-34-15 cab-LVDV-PWR-10-15 PN: 033331 PN: 052147 conga-QEVAL conga-QMX8X PN: 007005 PN: 016591 conga-QMX8/HSP-T PN: 016453 microSDHC-Card PN: 10000285 RS232 adapter cable PN: 48000023 Copyright © 2019 congatec AG QX8X_SDS_q10.indd 5/10... - Page 6 USB 2.0 Port 0 USB 3.0 Port 0 Header USB 7 (front view) USB2 USB 6 5.1 Audio Channel COM1 USB3 USB 5 SuperSpeed COM0 USB 4 USB Ports SPDIF USB 1 USB 2 Copyright © 2019 congatec AG QX8X_SDS_q10.indd 6/10...
-
Page 7: Dip Switch Settings
Connect SMB data signal to PCIe clock buffer* Disconnect Connect SMB clock signal to PCIe slots* Disconnect Connect SMB data signal to PCIe slots* Disconnect Default setting. Change to the setting highlighted in red for conga-QMX8X module. Copyright © 2019 congatec AG QX8X_SDS_q10.indd 7/10... -
Page 8: Jumper Settings
X50 - LCD BKLT_EN X29 - ATX PSON# X44 - Debug Display Configuration Configuration Configuration HIGH active* ATX Mode* 80h and 84h output* LOW active AT Mode / Always ON 90h and 94h output Copyright © 2019 congatec AG QX8X_SDS_q10.indd 8/10... -
Page 9: Boot Process
Boot Process The conga-QMX8X uses U-Boot as standard bootloader. The bootloader The conga-QMX8X boot process starts at Power On Reset (POR), where is GNU GPL open source software. A serial terminal connection is required the hardware reset logic forces the ARM core to begin execution. The on- in order to display the boot process and to modify the boot behavior. -
Page 10: Additional Information
The root filesystem (used for mmcboot), might also rw" (2nd partition on device 1) be used to extend the kernel command line The software provided with the conga-QMX8X sample distribution set is based on the Yocto Project (www.yoctoproject.org) and i.MX 8X specific Following, some frequently used scripts: add-on layers provided by NXP and congatec.
Need help?
Do you have a question about the conga-QMX8X and is the answer not in the manual?
Questions and answers