Security Setup; Security Settings; Hard Disk Security; Save & Exit Menu - Congatec COM Express conga-TCA3 User Manual

10.7

Security Setup

Select the Security tab from the setup menu to enter the Security setup screen.
10.7.1

Security Settings

Feature
Administrator Password
HDD Security Configuration
List of all detected hard disks
supporting the security feature set
10.7.2

Hard Disk Security

This feature enables the users to set, reset or disable passwords for each hard drive in Setup without rebooting. If the user enables password
support, a power cycle must occur for the hard drive to lock using the new password. Both user and master password can be set independently
however the drive will only lock if a user password is installed.
10.8 Save & Exit Menu
Select the Save & Exit tab from the setup menu with the <Arrow> keys to enter the Save & Exit setup screen.
Feature
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Options
Save Changes
Discard Changes
Restore Defaults
Boot Override
List of all boot devices
currently detected
Copyright © 2014 congatec AG
Options Description
Enter password Enter the setup administrator password.
Select the device to open the device security configuration submenu.
Description
Exit setup menu after saving the changes. The system is only reset, if settings have been changed.
Exit setup menu without saving any changes.
Save changes and reset the system.
Reset the system without saving any changes.
Save changes made so far to any of the setup options. Stay in setup menu.
Discard changes made so far to any of the setup options. Stay in setup menu.
Restore default values for all the setup options.
Select device to leave setup menu and boot from the selected device.
Only visible and active if Boot Priority Selection setup node is set to "Device Based".
TA30m16 93/95