Serial Port Console Redirection Submenu; 10.4.15.1 Console Redirection Settings Com0 Submenu - Congatec COM Express conga-TCA3 User Manual

10.4.15

Serial Port Console Redirection Submenu

Feature
COM0 Console Redirection
►Console Redirection Settings
Serial Port for Out-of-Band Management /
EMS Console Redirection
►Console Redirection Settings
Note
The 'Serial Port Console Redirection' can be only enabled if an external Super I/O offering UARTs has been implemented on the carrier board.

10.4.15.1 Console Redirection Settings COM0 Submenu

Feature
Terminal Type
Baudrate
Data Bits
Parity
Stop Bits
Flow Control
VT-UTF8 Combo Key Support
Copyright © 2014 congatec AG
Options
Disabled
Enabled
Submenu
Disabled
Enabled
Submenu
Options Description
VT100 Set the terminal type.
VT100+
VT-UTF8
ANSI
9600 Set baud rate.
19200
38400
57600
115200
7 Set number of data bits.
8
None Set parity.
Even
Odd
Mark
Space
1 Set number of stop bits.
2
None Set flow control.
Hardware RTS/CTS
Disabled Enable or disable the VT-UTF8 combination key support for ANSI/VT100 terminals.
Enabled
Description
Enable or disable redirection for serial port 0.
Opens console redirection configuration submenu.
Enable or disable serial port for out-of-band management / Windows Emergency
Management Services (EMS).
Opens console redirection configuration submenu.
TA30m16 76/95