Security Configuration; Intel ® Ethernet Connection I210 Submenu - Congatec COM Express conga-TCA3 User Manual

10.4.30

Security Configuration

Feature
TXE
TXE HMRFPO
TXE Firmware Update
TXE EOP Message
TXE Unconfiguration Perform
Intel Anti-Theft Technology Configuration
®
Intel ® AT
Intel ® AT Platform PBA
Intel ® AT Suspend Mode
10.4.31 Intel ® Ethernet Connection I210 Submenu
Feature
► NIC Configuration
Blink LEDs
UEFI Driver
Adapter PBA
Chip Type
PCI Device ID
Bus:Device:Function
Link Status
MAC Address
Copyright © 2014 congatec AG
Options
Enabled
Disabled
Enable
Disable
Enabled
Disabled
Enabled
Disabled
No option
No option
Enable
Disable
Enable
Disable
Enable
Disable
Options Description
Submenu Opens the NIC Configuration submenu.
0 - 15 Set the number of seconds for the Ethernet LEDs to blink.
No option Displays the UEFI driver version.
No option Displays the adapter PBA.
No option Displays the type of the chip in which the Ethernet controller is integrated.
No option Displays the PCI device ID of the Ethernet controller.
No option Displays the PCI Bus:Device:Function number of the Ethernet controller.
No option Displays the link status.
No option Displays the MAC address.
Description
Enable or disable trusted execution engine.
Enable or disable Host ME Region Flash Protection Overwrite (HMRFPO).
Enable or disable firmware update.
Enable or disable TXE End of Post (EOP) message.
Execute a TXE unconfiguration command
Enable or disable Anti-Theft (AT) technology.
Enable or disable AT platform Pre-Boot Authentication (PBA).
Enable or disable AT suspend mode.
TA30m16 87/95