Mandik FDMB Manual page 7

Design .20 or .21 with mechanical control and electromagnet can be complemented with limit
switch signaling of the damper blade position "CLOSE".
Limit switch „CLOSE"
Design .11 can be complemented with a terminal switch signaling of the damper blade position
"OPEN".
Limit switch „OPEN"
Limit switch „CLOSE"
Design with covered control
mechanism 24.v2
Pulse switch
Electromagnet (Solenoid)
Design with covered control
mechanism 24.v2
Design with covered control
Design with covered control
mechanism 80.v2
Limit switch „CLOSE"
mechanism 80.v2
Limit switch „CLOSE"
6
Pulse switch
Electromagnet (Solenoid)
Limit switch „OPEN"