Mandik FDMB Manual page 28

Fire dampers

Hide thumbs Also See for FDMB:

Blades overlaps

Act. mechanism side

Side without act. mechanism

Act. mechanism side

Side without act. mechanism

For the design .60 (with BKN supply and communication device) add to weight of the damper with

an actuating mechanism (from the Tab. 4.4.1. and Tab 4.5.1.) the weight of BKN (0.5 kg).

Rectangular dampers can be supplied on the customer´s demands in all subdimension of the

above mentioned range.

Flanges of rectangular fire dampers are 30 mm wide with oval hole (Fig. 39).

Dimensions of damper connecting flanges are in accordance with EN 12 220.

In case of damper installation into SPIRO duct, round dampers are supplied without the flanges

so as it is possible to connect them with external joints (it is necessary to specify this requirement

in the order). Damper length for SPIRO duct is 475 mm (Fig. 40).

"a"

"c"

"a"

"c"

"f"

Tab. 4.4.1

Tab. 4.5.1