Mandik FDMB Manual page 64

20
Installation opening has to be reinforced by
profile (UW, CW). Profil is fixed by screws
≥3,5 mm with corresponding length.
Distance between screws ≤200 mm.
20
A = max. 1000 mm
POSITION:
1 Fire damper FDMB with
Installation frame E1, R1
2 Gypsum plate
3 Fire resistant insulation
4 Mineral stone wool min.
density 140 kg/m
5
Flange connection
≥ 100
Installation opening has to
≥ 100
be reinforced by profile
(UW, CW). Profil is fixed
by screws ≥3,5 mm with
corresponding length.
Distance between screws
≤200 mm.
20
● Fire damper FDMB-C - installation opening dimensions
a x b = (2x(A + 85 mm) + 20 mm) x (B + 85 mm)
or a x b = (A + 85 mm) x (2x(B + 85 mm) + 20 mm)
● Fire damper FDMB-C - installation opening dimensions
a x b = (2x(D + 141 mm) + 20 mm) x (D + 141 mm)
or a x b = (D + 141 mm) x (2x(D + 141 mm) + 20 mm)
● Gap between frame and damper body and frame and
construction must be filled by glue (PROMAT K84)
● Fire damper FDMB-C - distance between dampers 104 mm
● Fire damper FDMB-K - distance between dampers 160 mm
● Flange to flange connection - Up to four dampers can be installed
63
20
Installation opening has to be reinforced by
profile (UW, CW). Profil is fixed by screws
≥3,5 mm with corresponding length.
Distance between screws ≤200 mm.
It is possible to use
corresponding number of
holes and screws
Dimensions
A1,B1,D1 ≤ 400
400 < B1,H1,D1 ≤ 800
800 < B1,D1 ≤ 1260
1260 < B1,D1 ≤ 1600
1600 < B1 ≤ 2000
≥ 100
Installation opening has to
be reinforced by profile
≥ 100
(UW, CW). Profil is fixed
by screws ≥3,5 mm with
corresponding length.
Distance between screws
≤200 mm.
Number Number
ZB1 ZH1
1 1
2 2
3 3
4 4
5 5