Table of Contents
Advertisement
NXP-PLV Accessories
NXP-PLV Accessories
The following section outlines and describes other AMX equipment available for the NXP-PLV.
NXA-AVB/ETHERNET Breakout Box (FG2254-10)
The NXA-AVB/ETHERNET Breakout Box (FIG. 6) may be purchased as a separate accessory to the
NXP-PLV. This box facilitates the installation and distribution of video, data, and audio to a device
located up to 200 feet (60.96 m) from the AVB box. This unit accepts either Composite or S-Video from
standard video devices.
While the NXP-PLV can control cameras without installation of an NXA-AVB, the
device will not be able to display incoming video without it.
This breakout box can be mounted on a horizontal flat surface, or within an equipment rack by using an
optional AC-RK Rack Kit.
Composite/
S-Video
(rear)
Audio
FIG. 6
NXA-AVB/ETHERNET Breakout Box (front and rear views)
Product Specifications
NXA-AVB/ETHERNET Specifications
Dimensions (HWD):
Power Consumption:
Certifications:
Features:
Availability:
5
S-Video Chroma
Luma
Mic Out
In
• 1.50" x 5.55" x 4.88" (3.81 cm x 14.10 cm x 12.40 cm)
• Width when attached to mounting ears: 6.65" (16.89 cm)
• 50mA (with audio/video input)
• 23mA (with no audio/video)
• Routed through NXA-AVB/Ethernet using a 12 VDC-compliant power supply
• FCC Part 15 Class B
• CE
• EN60950
• Accepts either Composite or S-Video (video-capable panels only).
• Provides audio distribution to non-video touch panels over a CAT5 cable (up
to 200 feet).
• Provides video/audio distribution to video-capable touch panels over CAT5
cable up to 200 feet (60.9 m).
• This unit may be purchased as a separate accessory to the NXP-PLV.
Power In
Ethernet In
Power (to panel)
NXP-PLV Modero PosiTrack Pilot Camera Controller
Ethernet (to panel)
(front)
Audio/Video
(to panel)
Advertisement
Table of Contents
