Table of Contents
Advertisement
Touchscreen Operation
7. At the Speed Calibration page (FIG. 30), rotate the Speed knob a full three times per direction. At
each stop, hold the knob in place for a full two seconds before reversing direction. When done, press
the Next button.
FIG. 30
Speed Calibration page
8. At the Tilt Calibration page (FIG. 31), move the joystick all the way up and down three times,
holding the joystick in place for at least two seconds at each stop. When finished, press the Next
button.
FIG. 31
Tilt Calibration page
9. When the calibration process is complete, press the enabled Done button at the bottom of the page
to return to the Main page.
25
NXP-PLV Modero PosiTrack Pilot Camera Controller
Advertisement
Table of Contents
