Table of Contents
Advertisement
Appendix A
Refer to the following Send Commands for more detailed information:
Input mask ranges
These ranges allow a user to specify the minimum and maximum numeric value for a field.
Only one range is allowed per field. Using a range implies a numeric entry ONLY.
Input Mask Ranges
Character Meaning
[
]
|
An example from the above table:
Input mask next field characters
These characters allow you to specify a list of characters that cause the keyboard to move the focus to the
next field when pressed instead of inserting the text into the text area.
Input Mask Next Field Char
Character Meaning
{
}
An example from the above table:
Input mask operations
Input Mask Operators change the behavior of the field in the following way:
Input Mask Operators
Character Meaning
<
>
^
Input mask literals
To define a literal character, enter any character, other than those shown in the above table (including
spaces, and symbols). A back-slash ('\') causes the character that follows it to be displayed as the literal
character. For example, \A is displayed just as the letter A. To define one of the following characters as a
literal character, precede that character with a back-slash. Text entry operation uses Input Masks.
117
•
- Sets the input mask for the specified addresses. (see the ^BIM section on
^BIM
page 65).
•
subcommand
^BMF
^BMF section on page 67).
Start range
End range
Range Separator
[0|255] This allows a user to enter a value from 0 to 255.
Start Next Field List
End Next Field List
{.} or {:} or {.:} Tells the system that after a user hits any of these keys, it is to proceed to
the next text area input box.
Forces all characters to be converted to lowercase
Forces all characters to be converted to uppercase
Sets the overflow flag for this field
- sets the input mask of a text area (see the
%MK
7" Modero Widescreen Touch Panels
Advertisement
Table of Contents
