Table of Contents
Advertisement
The Preset Recall Speed is global per camera head. For example, when setting a
preset recall speed for Camera 2 of 70%, any preset selections for Camera 2 will run
at that speed. Upon returning to Camera 1, which was previously setup with a
different preset recall speed of 45%, it will remain at 45% for all its preset selections,
and the touchscreen will reflect that difference.
The Panel Setup button opens the Panel Setup page. See the Panel Setup section on page 27 for more
information on setting up a connection for your NXP-PLV.
The Camera Limits button opens the Camera Limits page, as detailed on page 20.
The Exit Config button returns you to the Presets page.
Camera Limits Page
On the Camera Options page, pressing the Camera Limits button opens the Camera Limits page
(FIG. 21). The Camera Limits page contains controls to constrain the camera's movement, such as to
prevent the camera from coming in contact with protruding cables or to prevent it from moving too far
out of range of a particular focal point.
FIG. 21
Camera Limits Page
Camera Limits
Set Tilt Up
Set Pan Left
Find Home
Set Pan Right
Set Tilt Down
All
Pan
Tilt
Panel Setup
Camera Options
Exit Config
NXP-PLV Modero PosiTrack Pilot Camera Controller
Sets the upper limits of the camera tilt.
Sets the leftmost limits of the camera pan.
Returns the camera to its home state.
Sets the rightmost limits of the camera pan.
Sets the downward limit of the camera tilt.
Clears all limits on the selected camera
Clears all limits on pan movement on the selected camera
Clears all limits on tilt movement on the selected camera.
Opens the Panel Setup page.
Opens the Camera Options page.
Returns the screen from the Camera Options page to the Presets page.
Touchscreen Operation
20
Advertisement
Table of Contents
