Table of Contents
Advertisement
4. Press the red Device Number field to open the Device Number keypad (FIG. 33).
FIG. 33
Protected Setup page
5. Enter a Device Number for the panel into the Device Number Keypad. The default is 10001 and the
range is from 1 - 32000.
When using multiple devices within a NetLinx System, remember to assign unique
Device Number values to each device so that all assigned devices appear in the
System listing for the target Master.
6. Press Done to close the keypad, assign the number, and return to the Protected Setup page.
7. Press the on-screen Reboot button to restart the device and incorporate any changes.
Before continuing, open NetLinx Studio. This program assists in developing a System
Number, Master IP/URL, and Master Port number. Refer to your NetLinx Master's
instruction manuals for more information.
8. Obtain the System Number and Master IP Address from NetLinx Studio. This information must be
specific for the system used with the configured NXP-PLV.
9. Press the Config button on the main page to open the Panel Setup page.
10. Press the Protected Setup button (located on the lower-left of the panel page) to open the Protected
Setup page.
NXP-PLV Modero PosiTrack Pilot Camera Controller
Configuring Communication
28
Advertisement
Table of Contents
