Step 3: Confirm And View The Current Amx Usb Device Connections - AMX NXP-PLV Operation/Reference Manual

Modero positrack pilot camera controller
Hide thumbs Also See for NXP-PLV:
Table of Contents

Advertisement

Configuring Communication
8. Only AFTER the unit displays the main touchscreen page do you THEN insert the mini-USB
connector into the Program Port on the device. It may take a minute for the device to detect the new
connection and send a signal to the PC (indicated by a green System Connection icon). If this is your
first time installing the USB driver, a USB driver installation popup window (FIG. 36) appears on
the PC.
FIG. 36
USB driver installation popup window
9. Click Yes when told that a digital signature was not found. This action accepts the installation of the
new AMX USB driver. The device is now configured to communicate directly with the PC.
10. Navigate back to the System Settings page.

Step 3: Confirm and View the current AMX USB device connections

The USB driver information can be confirmed via two different methods:
1. Navigate to Start > Settings > Control Panel > and double-click the System icon to launch the
System Properties dialog.
2. Select the Hardware tab and click on the Device Manager button to launch the Device Manager
dialog.
31
This window notifies you that the NXP-PLV has been detected by the PC as a USB-compliant
device, and the PC is installing an appropriate USB driver to establish a proper
communication to the device.
This driver was installed on your PC during the installation of the latest NetLinx Studio and
TPDesign4 software application installations. These applications should be installed prior
to setting up a USB connection to the device.
The driver does not contain a Microsoft
such.
This process completes the association between driver and device.
Each time the same device is connected to the computer, the driver is automatically
loaded (using a unique name - example USB LAN LINK #1, #2).
Each time a different device is connected to the computer, the previous procedures will
need to be repeated.
Via the Control panel (previous steps 1 and 2) or
Via the Unplug or Eject Hardware icon from the Taskbar.
®
digital signature, and Windows
NXP-PLV Modero PosiTrack Pilot Camera Controller
®
then informs you of

Advertisement

Table of Contents
loading

Table of Contents