Calibrating The External Controls - AMX NXP-PLV Operation/Reference Manual

Touchscreen Operation

Calibrating the External Controls

To start the calibration process:
1. From the Camera Options page, press the Panel Setup button to access the Setup page (FIG. 25).
2. Press the PosiTrack Setup button to open the PosiTrack Setup page (FIG. 26).
FIG. 26 Control Calibration page
3. Press the Calibrate button to start the process.
4. Allow the device to calculate the centerpoints on the touchscreen. Do NOT touch the joystick or any
of the control knobs while this is being done (FIG. 27). When the device is finished, click Next to
proceed to the next page.
FIG. 27 Initializing Calibration page
23 NXP-PLV Modero PosiTrack Pilot Camera Controller