KidKraft Cedar Summit RICHMOND LODGE Installation And Operating Instructions Manual page 75

Step 38: Attach Swings
A: Using 1 Threaded Clip per chain, join 1 Long Swing Chain to each side of the swing belt seat. Make sure to
close the Threaded Clip tightly using an adjustable wrench. (fig. 38.1 and 38.2).
B: Using 1 Threaded Clip per chain, join the Short Swing Chain to the Acro Bar and Acro Handle. Make sure
to close the Threaded Clip tightly using an adjustable wrench. (fig. 38.2 and 38.3)
C: Attach the other end of the swing chains to the Quick Clips attached to the swing hangers. (fig. 38.1)
Fig. 38.1
Threaded Clips attach
to seat and Acro bar.
Long Swing Chain
Swing Seat
Fig. 38.2
Tighten Clip using
adjustable wrench
Short
Swing
Chain
Swing Seat
Threaded Clip
75
Chain Link
Acro Bar
Acro Handles
Other Parts
1 x Acro Bar
2 x Acro Handle
2 x Swing Belt Seat
2 x Short Swing Chain
4 x Long Swing Chain
6 x Threaded Clips
Fig. 38.3