KidKraft Cedar Summit RICHMOND LODGE Installation And Operating Instructions Manual page 68

Step 34: Small Roof Assembly
Part 1
A: Tight to the inside edge of the outside slats attach 1 Narrow Angle Bracket per slat with 2 (S13) #6 x 5/8" Pan
Screws per bracket. (fig. 34.1)
B: Place (340) Front Small Roof against (341) Back Small Roof so the tops form a peak then place Small Roof
Support Assembly against one side so the peaks meet and the ends of the roof supports are flush with the ends
of the roof panels. Attach with 6 (S11) #8 x 2" Wood Screws. (fig. 34.1)
Fig. 34.1
Flush
341
Wood Parts
1 x Front Small Roof 1-1/4 x 22-9/16 x 33-5/8"
340
1 x Back Small Roof 1-1/4 x 22-9/16 x 33-3/8"
341
S11
S13
Flush
x 2 per
bracket
Hardware
6 x #8 x 2" Wood Screw
S11
4 x #6 x 5/8" Pan Screw
S13
68
Narrow Angle
Bracket
Other Parts
2 x Narrow Angle Bracket
Small Roof
Support
Assembly
Flush
340