KidKraft Cedar Summit RICHMOND LODGE Installation And Operating Instructions Manual page 19

Step 2: Access Ladder / Rockwall Assembly
Part 1
A: Place (020) Left Access on one side of 3 (022) Treads and (021) Right Access on the other side with the
grooves facing in. (fig. 2.1)
B: Fit each (022) Tread into grooves on both (020) and (021) Access rails, make sure the top edge of the (022)
Treads are flush to the front of the Access rails. (fig. 2.1 and 2.2)
C: Pre-drill pilot holes with a 1/8" drill bit and attach rails and treads together using 4 (S3) #8 x 2-1/2" Wood
Screws per tread. (fig. 2.1)
Fig. 2.1
021
Fig. 2.2
End View
Flush to
edges
Wood Parts
1 x Left Access 1-3/8 x 2-1/2 x 52-5/8"
020
1 x Right Access 1-3/8 x 2-1/2 x 52-5/8"
021
3 x Tread 5/4 x 4 x 19-1/2"
022
022
S3
12 x
S3
Flush to
top edge
022
Top Edge of Access Rail
Hardware
#8 x 2-1/2" Wood Screw
S3
19
020
Flush to
top edge