KidKraft Cedar Summit RICHMOND LODGE Installation And Operating Instructions Manual page 46

Step 17: Attach Swing Assembly To Fort
A: Place Swing Assembly against top of (050) SW Panel, make sure assembly is level then attach from
inside the fort assembly into each L-Beam Bracket with 4 (G27) 5/16 x 1 ¾" Hex Bolts (with 2 flat washers
and 1 lock nut). (fig. 17.1 and 17.2)
Fig. 17.1
Fig. 17.2
G27
L-Beam
Bracket
5/16" Flat
Washer
4 x
G27
050
050
5/16"
Lock Nut
Swing
Assembly
Hardware
5/16 x 1-3/4" Hex Bolt
(flat washer x 2, lock nut)
46
Swing
Assembly