KidKraft Cedar Summit RICHMOND LODGE Installation And Operating Instructions Manual page 20

Step 2: Access Ladder / Rockwall Assembly
Part 2
D: Place (023) Ladder Gap on each access rail so there is a 2-3/8" gap between (023) Ladder Gap and the top
(022) Tread. Attach using 4 (S11) #8 x 2" Wood Screws. (fig. 2.3)
E: Place (024) Rock Rail on the ground next to (020) Left Access so it matches the orientation of the two access
rails as shown in fig. 2.3. Attach (025) RW-AL Support flush to the top of Access Ladder assembly and (024)
Rock Rail using 3 (S18) #6 x 1" Wood Screws in the top holes and 3 (S11) #8 x 2" Wood Screws in the bottom
holes. Pilot holes in (025) RW-AL Support should be centred over the rails. (fig. 2.3)
Fig. 2.3
S18
x 3 in top holes
Flush
Wood Parts
1 x Ladder Gap 1 x 4 x 21"
023
1 x Rock Rail 1-3/8 x 2-1/2 x 52-5/8"
024
1 x RW-AL Support 1 x 4 x 39-3/8"
025
S11
x 3 in bottom holes
x 4
S11
023
022
021
Hardware
7 x #8 x 2 " Wood Screw
S11
3 x #6 x 1" Wood Screw
S18
20
025
024
020