KidKraft Cedar Summit RICHMOND LODGE Installation And Operating Instructions Manual page 51

Step 20: Attach Flange Assembly to Fort
Part 2
D: Place (200) SL Gusset tight to (040) SL Panel, flush to the top of the bottom opening and attach to Flange
Assembly with 2 (S6) #12 x 1" Pan Screws. (fig. 20.4 and 20.5)
E: Pre-drill pilot hole with a 3/16" drill bit then attach (200) SL Gusset to (040) SL Panel opening with 1 (WL5)
1/4 x 2-1/2" Wafer Lag (with flat washer). (fig. 20.4 and 20.5)
Fig. 20.5
200
040
Flush
Wood Parts
1 x SL Gusset 1-1/4 x 3 x 15-3/4"
200
Flange
S6
Assembly
5/16" Flat
Washer
2 x
1 x
Fig. 20.4
200
040
WL5
Hardware
#12 x 1" Pan Screw
S6
1/4 x 2-1/2" Wafer Lag (5/16" flat washer)
WL5
51
Flange
Assembly