KidKraft Cedar Summit RICHMOND LODGE Installation And Operating Instructions Manual page 25

Step 6: Join Swing and Slide Wall Assemblies
Part 1
A: With at least two helpers lift the Slide Wall Assembly and Swing Wall Assembly so the (041) Back Narrow
Panel and (042) Front Narrow Panel meet with (052) Back Wall Panel and (051) Front Wall Panel and are tight
together as shown in fig. 6.1.
B: Make sure the assembly is square then on the inside of the assembly, tight to (040) SL Panel and flush to
the bottom of the panels attach 1 (060) Floor Joist to (041) Back Narrow Panel and (052) Back Wall Panel and
a second (060) Floor Joist to (042) Front Narrow Panel and (051) Front Wall Panel with 4 (S7) #12 x 2" Pan
Screws per board. (fig. 6.1 and 6.2)
Fig. 6.1
041
040
Slide Wall
Assembly
Wood Parts
2 x Floor Joist 1-1/4 x 3 x 40-3/4"
060
Fig. 5.5
S7
Tight
(both sides)
8 x
042
Swing Wall
Assembly
060
052
Hardware
#12 x2" Pan Screw
S7
25
051
Panel
060
Flush
Fig. 6.2
S7
x 4 per board