KidKraft Cedar Summit RICHMOND LODGE Installation And Operating Instructions Manual page 29

Step 7: Floor Assembly
Part 1
A: Place 1 (070) Floor Board tight to (040) SL Panel and attach to each (061) Side Joist with 4 (S2) #8 x 1-1/2"
Wood Screws. Repeat for second (070) Floor Board tight to (050) SW Panel and attach to each (062) Short Side
Joist. (fig. 7.1 and 7.2)
B: Place (071) Long Floor Joist tight to the bottom of each (070) Floor Board, centred over the pilot holes on the
(040) SL Panel and (050) SW Panel then attach with 2 (S4) #8 x 3" Wood Screws per panel. (fig. 7.1 and 7.3)
Fig. 7.1
050
062
Fig. 7.3
S4
x 2 per
side
Wood Parts
2 x Floor Board 1 x 5 x 40-5/8"
070
1 x Long Floor Joist 1-1/4 x 3 x 62-5/8"
071
061
Tight
071
062
070
Wall hidden
for clarity
Hardware
8 x #8 x 1-1/2" Wood Screw
S2
4 x #8 x 3" Wood Screw
S4
29
040
Fig. 7.2
070
061
x 4 per
S2
board
Tight
070