KidKraft Cedar Summit RICHMOND LODGE Installation And Operating Instructions Manual page 58

Step 25: Attach TNR Brace Assembly
A: Use (231) TNR Upright as a guide to judge the proper bolt location, remove the bottom pan bolt and nut. The
bolt will no longer be needed, but keep the lock nut. (fig. 25.1 and 25.2)
B: Attach the top of the TNR3 Post Mount to TNR2 Slide Clamp Ring using 1 (PB2) 1/4 x 1-1/4" Pan Bolt (with
the previously removed lock nut and 1 flat washer). (fig. 25.2)
C: Insert TNR3 Post Mount on (231) TNR Upright, pre-drill with a 1/8" drill bit then attach with 2 (S6) #12 x 1"
Pan Screws. (fig. 25.2)
D: Attach (230) TNR Ground Brace flush to the bottom of (041) Back Narrow Panel with 2 (S11) #8 x 2" Wood
Screws and 1 (S4) #8 x 3" Wood Screw. (fig. 25.1 and 25.3)
Fig. 25.1
041
Remove PB1 (1/4 x 3/4"
Pan Bolt) first then install
PB2 (1/4 x 1-1/4" Pan Bolt
with previously removed
lock nut)
231
TNR Brace
Assembly
1 x 1/4 x 1-1/4" Pan Bolt
PB2
1 - (1/4" flat washer, 1/4" lock nut - previously removed)
S6
2 x #12 x 1" Pan Screw
1 x #8 x 3" Wood Screw
S4
2 x #8 x 2" Wood Screw
S11
Fig. 25.2
TNR2 Slide
Clamp Ring
PB2
Fig. 25.3
S11
Hardware
58
1/4" Flat
Washer
231
S6
041
S4
Other Parts
1 x TNR3 Post Mount
Lock
Nut
TNR3 Post
Mount
230