KidKraft Cedar Summit RICHMOND LODGE Installation And Operating Instructions Manual page 66

Step 33: Large Roof Assembly
Part 1
A: Place (330) Front Roof Panel against (331) Back Roof Panel so the tops form a peak then tight to the inside
edge of the outside slats attach 1 Narrow Angle Bracket per slat with 2 (S13) #6 x 5/8" Pan Screws per bracket.
(fig. 33.1 and 33.2)
B: Attach the third Narrow Angle Bracket centred on the middle slat with 2 (S13) #6 x 5/8" Pan Screws. (fig. 33.1
and 33.3)
Narrow Angle
Bracket
Fig. 33.2
Flush
SIZE DWG. NO.
S13
A Details
SCALE:1:50 WEIGHT:
Wood Parts
1 x Front Roof Panel 1-1/4 x 37 x 44"
330
1 x Back Roof Panel 1-1/4 x 36-3/4 x 44"
331
Fig. 33.1
REV.
x 2 per
bracket
SHEET 1 OF 5
331
Hardware
6 x #6 x 5/8" Pan Screw
S13
66
Fig. 33.3
Narrow Angle
Bracket
Flush
Use #8 x 3" Wood Screw for roof suppo
Use #8 x 2" Wood Screw for roof suppo
Flush
330
3 x Narrow Angle Bracket
Centred
S13
x 2
Other Parts