8: Maintaining Your Glassware Washer; Maintenance Safety Precautions; Maintaining The Stainless Steel Interior - Labconco SteamScrubber 4010010 Series User Manual

8: Maintaining Your Glassware Washer

This section details the maintenance required for optimal performance and operation of
the Glassware Washer.
Under normal operation, your Glassware Washer will require little routine maintenance
to keep it functioning properly.

Maintenance Safety Precautions

The following safety precautions must be followed by all personnel maintaining the
equipment.
 Wear safety glasses, and/or additional eye and face protection as required by
your Health & Safety Department.
 Wear gloves, and/or additional skin protection as required by safety instructions
for cleaning/disinfecting chemicals used. Consult your Health & Safety
Department for additional skin protection requirements.
 No loose fitting clothes
 Wear close-toed shoes
 Although the service operations detailed in this section do not involve access to
areas of the product with moving or electrical parts, should you remove any
panels that expose moving or electrical parts, you must follow these instructions
before doing so:
o Disconnect main power cord or electrical service connection
o Never touch moving parts such as fan blades or blower wheels.

Maintaining the Stainless Steel Interior

The interior of the Glassware Washer is type 304 stainless steel. Never use metal
scouring pads on the stainless steel interior. Metal scouring pads can scratch or leave
ferrous particulate that will rust.
To maintain the appearance and quality of the stainless steel interior, perform the
following tasks as needed:
 Wipe the outer edges on the inside door panel to remove particles and residue
that occur during loading.
82