Labconco SteamScrubber 4010010 Series User Manual page 100

Washer leaks
around door seal
Ethernet
connectivity
Tank sump gasket.
Washer is not level.
Loose connection at
hose clamps.
Loose connection at
fill valve.
Obstruction in drain
line.
Washer overfilling.
Improper installation.
Unit not level.
Door latch
No Network.
DHCP Enabled:
setting switched off
100
Tighten nuts or
Check sump
replace o-ring. Do
fasteners.
not over tigten nut.
Check with level Adjust leveling feet.
Tighten hose clamp.
Check water
Tighten or replace
supply/ fill valve
seal.
connection.
Remove obstruction.
Recalibrate of
Check operation
replace water level
of fill sensor.
sensor.
Check the cabinet
opening to see if it is
aligned properly with
the door, adjust feet.
Adjust feet to level
unit.
Check door latch Adjust hinge pins or
for proper sealing. door striker.
Connect to valid
Confirm network
network.
Check DHCP Turn DHCP Enabled
Enabled setting ON.