Security - Labconco SteamScrubber 4010010 Series User Manual

Security

A four-digit security code can be set that requires entry of a PIN to gain access to user-
defined areas. The PIN will always be required to enter the Security screen.
 From the Settings Screen, touch the
1234) to gain access.
 Select the areas to be secured. See Fig. 6-15.
 To change the PIN, touch
[Save].
 Once all changes are complete, to enable security, the
bottom, right corner of the Security Screen must be set to Enable.
 Touch [Back].
Security
[Set Code], enter new PIN two times, then touch
53
Icon, then enter the PIN (default is
Security Toggle
Figure 6-15
in the
Security
Toggle