Skip Segment; Pause; Cancel; Chart - Labconco SteamScrubber 4010010 Series User Manual

Skip Segment

The Glassware washer has the ability to skip an active segment. Press and hold the
Active Segment for 3 seconds to display the
skip the active segment. If the skipped segment is a wash or rinse the glassware
washer will perform a drain step and then continue with the next programed segment.
When complete, the segment will display a yellow check mark. Press the yellow check
mark to display the non-fatal error. A non-fatal Skipped Segment Error (SS) will be
recorded in the data log.

Pause

Touch the Pause Icon (Fig. 6-3). A pop-up confirmation will display, select
pause the wash cycle, or select
will stop and the Start Program
can be opened by pressing the OPEN button (see Fig. 6-1). To resume the wash cycle,
close the door and touch the
resume the cycle once the internal temperature stabilizes. When the cycle resumes the
estimated time remaining will begin when the pre-pause system temperature is reached.
When complete, the segment will display a yellow check mark. Press the yellow check
mark to display the non-fatal error. A non-fatal Program Paused Error (PP) will be
recorded in the data log.

Cancel

Touch the Cancel
cancel the wash cycle, or select
program is cancelled the washer will drain and when complete, display a red
segment in which it was cancelled. Press the red
Canceled Error (PC) will be recorded in the data log.

Chart

Touch the Chart Icon to display a chart of the current program's data set as defined by
the systems available sensors and the user's requirements. See
this section for more details.
[Cancel]
Icon will return. Once the program is paused the door
Start Program
Icon (Fig. 6-3). A pop-up confirmation will display, select
[Cancel]
SKIP STEP? confirmation. Touch
to return to the Home Screen. The program
Icon, press [OK]
to return to the Home Screen. When a
X to display the fatal error. A Program
42
[OK]
[OK]
to confirm. The washer will
[OK]
X at the
Chart Data File
to
to
to
later in